単一ポート PSE コントローラ

Quickly and easily add up to 90 W to an Ethernet port using Silicon Labs IEEE-compliant single port PSEs. Tailored to the needs of a single port system, these PSE devices do not require a host MCU and are easy to configure, use very little board space and include a status LED driver. They are optimized for mid-spans and PoE injectors. Simple EVBs jump-start designs with easy to understand schematics, two-layer PCBs and IEEE compliance test reports

パッケージ・サイズ
3 x 3 mm
External host or MCU
Not Required

Single Port PSE Controller Common Specs

  • Fully autonomous IEEE 802.3at and 802.3bt compliant PoE PSE
  • No host or MCU control required
  • Built-in status LED drivers
  • Small package sizes, 3x3 mm or 5x7 mm QFN
  • Minimal board space, minimal BOM count
  • Simple EVBs for 15 W, 30 W or 90 W power
  • EVBs include schematics and board layouts
ステータス
Find the Right Single-Port PSE Controller Select Columns
列を選択
部品番号 説明 温度範囲(ºC) パッケージ・タイプ 最大出力(W)
802.3at Single Ethernet port PSE controller -40 85 QFN11 30

A -> Z で並べ替え
Z -> A で並べ替え

値別にフィルタ…

お問い合わせ
閉じる
ロードの結果
Powered by Translations.com GlobalLink OneLink Software